делиться на микро - письмо
x
Химреагенты

Связьснами

  • Kоммутатор:
    86-22-58627718(Головной офис)
    86-10-58783060(Пекинский офис) 
  • Факс: 86-22-58627711(Головной офис)

  • Жалобы клиентов: Тел.: 86-22-58627715
Химреагенты
CS210L Жидкость, основа для буферной жидкости
  • объяснительная записка
  • Лист безопасных данных

Описание 

  1. Может эффективно заменить бурового раствора и предупредить смешение цементного раствора и бурового раствора.
  2. Температура использования : ниже 150℃(302 ℉, BHCT).
  3. Обеспечивает эффективным схватыванием, водный раствор малой концентрации имеет отличную вязкость.Водный раствор основы для буферной жидкости имеет отличную поднимающую способность,благодаря чему, добавка-утяжелитель, нерастворимые твердые вещества и капли могут быть подняты водным раствором.
  4. Основа для буферной жидкости должна пройти испытания на соответствие перед примерением.
  5. Рекомендуем непосредственно использовать CS210L так как значительно снижает вязкость после разбавления.

Физико-химические характеристики

Внешний вид

Плотность g/cm3

Растворимость в воде

Точка отвердения,℃

светло-желтая вязкая жидкость

1.10±0.10

100%

≤0℃

Характеристика основы для буферной жидкости

Объект

Испытательные условия

Технический показатель

Вязкость по Маршу, с

Воронка Марша

≥200

Вязкость, mPa·s

Вискозиметр

≥5000

Упаковка и хранение

  • Упаковывается в пластмассовые баки по 20кг. или 25кг., 200л. или 5 галлонов США, или согласно требованиям потребителя.
  • Гарантийный срок хранения - 12 месяцев. Если закончился срок действия, лабораторные испытания должны проводиться для подтверждения качества перед использованием.

SECTION 1: PRODUCT NAME 
PRODUCT NAME: High efficiency spacer additive CS210L.
PRODUCT DESCRIPTION: Oil well cement spacer additive.
SECTION 2: HAZARDS IDENTIFICATION 
CHARACTERISTICS: Nonflammable and inexplosive。
HEALTH HAZARDS: Irritate eye and skin slightly; Cause irritation of the mucosal and upper respiratory tract.
ENVIROMENTAL HAZARDS: Slightly toxic to fish and animal.
SPECIAL ATTENTION: None.
SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS

INGREDIENT NAME

COMPOSITION

CAS No.

PVA

20%

9002-89-5

Graft polymers Between Starch and Acrylamide

5%

9005-25-8

Water

75%

7732-18-5

SECTION 4: FIRST AID MEASURES 
SKIN CONTACT: Put off contaminated clothing,rinse with soapy and clean flowing water.
EYE CONTACT: Raise the eyelid. Rinse it with plenty of clean flowing water and physiological saline. Consult a doctor if irritation occurs.
INGESTION: Drink plenty of water to induce vomiting; If be uncomfortable, consult a doctor please.
INHALATION: Escape to fresh air; If have breathing difficulties, consult a doctor.
SPECIAL ATTENTION: None.
SECTION 5: FIRE-FIGHTING MEASURES 
FLAMMABILITY: See Section 9(Physical and Chemical Properties)
FIRE FIGHTING MEDIUM: Foam, dry powder, carbon dioxide, water.
SPECIAL FIRE-FIGHTING EQUIPMENTS: None.
SECTION 6: ACCIDENTAL RELEASE MEASURES 
PERSONAL PRECATIONALS: Use personal protective equipment recommended in Section 8 (Exposure Controls/Personal Protection).
SPILL: Collect the most of leakage,clean the site of leakage.
WASTE TREATMENT METHODS: Be properly buried or handled according to local environment requirement.
PACKING TREATMENT METHODS: Transferred to the dumping site for proper disposal.
SECTION 7: HANDLING AND STORAGE 
HANDLING: Keep the containers closed when not in use. Do not get in eyes, on skin. Wear proper personal protection.
STORAGE ATTENTION: Stored in a dry cool place,prevented from the sun and rain, kept away from the heat and fire and incompatible materials.
SPECIAL ATTENTION: None.
SECTION 8: ESPOSURE CONTROLS AND PERSONAL PROTECTION 
ENGINEERING CONTROL: Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors or particles below their respective threshold limit value.
RESPIRATORY PROTECTION: Not required.
SKIN PROTECTION: Wear standard protective clothing and gloves.
EYE PROTECTION: Wear chemical splash goggles.
SPECIAL ATTENTION: Smoking, food and water drinking are all forbidden.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 
COLOR: Faint yellow.
BULK DENSITY(g/cm3): 1.10±0.10.
Physical state: Ropy Liquid.
ODOR:Slightly pungent.
WATER SOLUBILITY: Completely soluble in water.
SECTION 10: STABILITY AND REACTIVITY 
AVIOD: Open fire, High temperature
INCOMPATIBLE MATERIAL: Strong oxidizers
HAZARDOUS DECOMPOSITION PRODUCTS: None.
SECTION 11: TOXICOLOGICAL INFORMATION 
INVASIVE ROUTE: Skin or eye contact and accidental inhalation or ingestion.
HEALTH HAZARD: Irritate eye and skin slightly; dust will stimulate the respiratory tract; careless ingestion, has a stimulating effect on the oral cavity and stomach.
SKIN CONTACT: Contact with skin for a long time, slightly induce skin redness.
EYE CONTACT: Induce eye irritant.
INGESTION: Lead to nausea and vomiting
INHALATION: Lead to cough and prickle
CARCINOGENICITY: None.
SPECIAL REMIND: None.
SECTION 12: ECOLOGICAL INFORMATION 
BIODEGRADABLE: Not available.
ECOTOXICITY: Not available.
SECTION 13: DISPOSAL CONSIDERATIONS
WAST TREATMENT METHOD: Be properly buried or handled according to local environment requirement.
PACKING TREATMENT METHOD: Transferred to the dumping site for proper disposal.
SECTION 14: TRANSPORT INFORMATION 
This product is not included in the dangerous goods transport international regulations(IMDG,IATA,ADR/RID)
PACKAGE Plastic barrel
SECTION 15: REGULATORY INFORMATION 
The Management Regulations of Dangerous Chemicals Management
The Practical Detailed Rules and Regulation for Dangerous Chemicals Management
The Classification and mark of Common Chemical Products (GB 13690-2009)
The General Rule of Common Chemical Products (GB15603-1995)
The Technology Conditions for the Packing Marks for Hazardous Cargo (GB 12463 -1990)
SECTION 16: OTHER INFORMATION 
EFFECTIVE DATE: 05/08/2003.
PREPARTING DATE: 09/30/2013.
SUGGEST FOR AND USED RESTRICTIONS: The product is to be used in applications consistent with our product literature. This product is applied to industry only.